Window film price is quoted per sq ft, and the rate depends mostly on the type: plain frosted film is usually the lowest, cut or printed film costs more, and perforated one way vision film sits above both. Public Pune listings checked in October 2026 show a wide spread rather than one rate, so a fair comparison needs the same film, the same finish and the same fitting terms. The figures below are market indications, not a rate card.
They come from trade pages and seller sites, with mixed units, and many leave out GST, fitting and design. Solar-control (heat-rejection) film is a different product with its own pricing and is not covered here.
What is the price of window film per sq ft?
| Film | Range seen in Pune listings (₹ per sq ft) | What the range hides |
|---|---|---|
| Plain frosted film, supply only | About ₹20 to ₹75 | A roll or cut sheet with no design and no fitting |
| Frosted film cut to a design or printed | About ₹80 to ₹220 | Pattern time, cutting, printing, sometimes fitting |
| One way vision film | About ₹30 to ₹120, most listings ₹45 to ₹80 | Minimum orders, GST and size limits |
Two points matter. The ranges overlap, because listings describe different products, so a cheap printed film can undercut a dear plain one on paper. And hardly any of them include fitting. The full list of Pune ranges for other vinyl products, with the sq ft arithmetic, is in the vinyl printing price guide.
Check the unit before comparing anything. A price per square metre must be divided by 10.76 to get a price per sq ft, so ₹500 per sq m is about ₹46 per sq ft. On a shop front of two panes 5 ft x 7 ft and a door 3 ft x 7 ft, which is 91 sq ft in all, every ₹10 of difference in the rate moves the total by ₹910. That is why the specification matters more than the headline figure.
Why does printed window film cost more than plain frosted film?
Every extra step is real material or real work, which is why the rate climbs as you go down this list.
| Film | Steps behind the rate |
|---|---|
| Plain frosted | Film, cutting to pane size |
| Cut-design frosted | Film, design time, plotter cutting, weeding the waste, transfer tape |
| Printed clear or white film | Film, ink and printer time, lamination, trimming |
| One way vision | Perforated film, printing, optional lamination, cut-outs for handles |
Intricate patterns cost more to cut and peel than bold ones, so a simple strong design is the lowest-cost way to look finished. Covering only what needs covering helps too: a 2 ft frosted band on a 7 ft pane is under 30% of the area, so the film cost falls by about 70% while privacy at eye level stays. The frosted glass film and one way vision pages describe each film and where it suits.
How do glass size and height change the fitting cost?
Fitting is charged for time, access and risk, not for film. A single door pane is a short job, while twelve small panes in a partition grid take far longer for the same area, because each one needs its own cutting and trimming. A pane taller than a person needs a ladder or a platform, and a first-floor facade needs a safe way to reach the outside face.
- Pane size and count. Many small panes take longer than a few large ones.
- Height and access. Ladders, platforms and ropes add time and cost.
- Which face. Inside faces are easy; outside faces on upper floors are harder.
- Old film or stickers. Stripping and cleaning off adhesive is extra work.
- Working hours. Offices and shops often want evening or weekend fitting.
Does window film price include installation?
Often not. Most listings quote the film or the printed sheet, and fitting is a separate line, if it is offered at all. Some sellers fold fitting into the rate, which makes their per sq ft figure look higher than a supply-only rate for the same film, so the two cannot be compared directly. GST adds another variable, because some quotes show it separately and others fold it in.
Put the same four lines to every seller: the exact film, the finish, who fits it, and whether GST is in the figure.
Is window film cheaper by the roll or by the square foot?
A roll is cheaper per sq ft only if you use all of it. Rolls typically come about 4 to 5 ft wide and many metres long, so a small job wastes the remainder or leaves you holding film you cannot use. Selling by the sq ft prices the area of your panes, though offcuts and minimum order values can make the area you pay for larger than the glass.
Minimums matter more than the headline rate on small jobs. As a made-up example, a seller with a ₹3,000 minimum order turns a 20 sq ft job into ₹150 per sq ft, however low the listed rate. Also check pane widths against the roll: a pane wider than the roll needs a seam, so ask where it will fall.
Rates usually ease as the area grows, because setting up the file and the machine takes the same effort for 20 sq ft as for 200. Ordering every pane, door and partition together as one job often beats ordering room by room.
How do I get an exact window film quote?
A good quote lists the film, the area, the finish, fitting and GST on separate lines, so you can see which one to drop. To get one, send what a seller needs to measure the job instead of guessing it:
- The width and height of every pane, taken inside the frame.
- A straight-on photo of the glass, and which face the film goes on.
- The film you want: plain frosted, cut design, printed or one way vision.
- Your logo or pattern as a vector file, if you have one.
- The floor level, the access, and the hours when fitting can happen.
At Chandni Chowk, Pune, 3 Red Media confirms its rate from your pane sizes and design, and the proof shows the film laid onto your glass before anything is printed. Send the pane list through the quote form and compare the answer line by line with any other quote you hold.
